Sign in or register for a JobTech account.

Jobs that require etching skill

Nanyang Technological University
20Mar
Research Fellow
Nanyang Technological University   via JobsCentral



Roles & Responsibilities

Four (4) Research Fellow positions are currently available at the School of Physical & Mathematical Sciences, Nanyang Technological University (NTU). This is an Industry Collaboration Programme (ICP) with a focus on the development of non-volatile memory devices for embedded systems. The project involves university laboratory research on NVM materials and devices, as well as joint development with industry partner on 300 mm NVM wafer. The candidate    Read more

must have good experience in some of the areas listed below, possesses excellent skills.

Physical vapour deposition (PVD) of non-volatile memory (NVM) structures, e.g., ReRAM, MRAM, PCRAM, or NAND flash materials

Atomic layer deposition (ALD) of NVM structures

Electrical transport measurement using probe station, or on bonded chip, with good experience on memory test measurement

Skilful in lithography techniques, e.g. optical, electron beam, or laser beam

Possesses good nanofabrication techniques, specifically reactive ion etching, and/or ion milling

Structural, electrical and optical characterisation techniques

CMOS back-end of line (BEOL) integration process

Device packaging techniques

Metallisation processes, e.g. copper plating, chemical-mechanical planarisation

Requirements

These positions are preferably for those with the following qualification and experience:

A qualified PhD degree in Physics, Engineering, or Material Science

Ability to work independently and as part of a team with strong initiatives

Good communication and interpersonal skills

Good scientific paper and intellectual property writing skills

Semiconductor wafer development or manufacturing experience

We regret only shortlisted candidates will be notified.

Skills
CANDIDATEASIA GROUP PTE. LTD.
20Mar
Process Engineer
CANDIDATEASIA GROUP PTE. LTD.   via JobsCentral



Roles & Responsibilities

Responsible for manufacturing process at Stamping, Wet Cleaning, Lamination, UV Exposure and Etching for lead frame and Waste Chemical treatment at PES.

Responsible for improvement programs in Yield, Capacity, Cycle Time and Capability to achieve cost reduction.

Perform 5W1H methodology to determine root cause and implement improvement actions on daily production lot rejects.

Perform evaluation to optimize and improve the manufacturing process capability and yield for new products.

Qualify new    Read more

materials; processes, equipment and system for continuous improvement.

Establish and generate the process control, process FMEA and operation work Instruction documentation.

Perform SPC review.

Perform other duties that may be assigned by the superior from time to time

Requirements

Knowledge in copper etching, photosensitive film imaging & chemical processing.

Experience in lead-frame or PCB etching manufacturing processes.

Skilful in problem solving techniques using statistical tools and data analysis.

Familiar with Microsoft Office software and project management skill.

CandidateAsia Group Pte Ltd

R1330495 / EA16C7962

Skills
The Advertiser
19Mar
Technical Service And Development Specialist
The Advertiser   via JobsCentral



Roles & Responsibilities

We are looking for a Technical Service and Development Specialist to join our business.

Job responsibilities:

Primary region to support: ASEAN ANZ

Segments to support: MEMs, Sensors, Consumer, Communications, Transportation Electronics lamp and Luminaire etc.

Technical support and application development for Silicone materials applied in above markets (but not limited to only to those markets or only silicone chemistry, need to support polyurethane chemistry if necessary.)

To be a technical liaison    Read more

with customers and Interpret application language into material needs

Translate un-met and future customer needs into company's internal language and initiate/participate/lead new product commercialization projects for meeting these needs

Technical discussion on suitability of material to customer specific application and advice for customers (property of material, how to apply material, trouble shooting etc)

Conduct different characterizations for products in lab and assess material properties to generate data for existing materials or new product development

Work with internal stakeholders such as sales and marketing for joint customer visits, provide idea and opinion for them during commercial meetings from standpoint of technology

Work with lab technicians for product testing

Help commercial in product quality issues at customer by working with manufacturing eg. Problem solving and trouble-shooting (cure inhibition, contamination studies etc)

Work with external tool vendors (molding, dispensing etc) under strategy if needed

Participate in technical discussion with product development team, technology platform team and supply chain that are located in US, Japan, Korea, China and EU.

Requirements

Bachelor's degree and above in related courses such as Polymers, Materials, chemistry, Physics, Electronics, Chemical Eng, Electro-Mechanical

Minimally 5 years of technical experience with customer interaction, who has knowledge of material, application (MEMs and Sensors, Advance assembly solutions, cellphone assembly, etc)

Knowledge of material and chemistry (silicone chemistry is preferred)

Knowledge with various mechanical and electrical properties & measurement and those relationships with assembly packages/ MEMS and Sensor packages.

Knowledge of assembly process (including dispensing, molding, assembly, reliability testing etc)

Knowledge of process: eg. MEMS process integration, temporary bonding technologies, encapsulation, jetting, dispensing, etching, thin wafer handling will be advantageous,Knowledge of trends in MEMS, Sensors, Assembly, transportation Electronics,consumer and communication market will be added advantage

Ability to grow understanding of silicone based chemistry set and able to align external requirements to the capabilities and value proposition of silicones used in application.

Prior working experience with customers for specification work is advantageous

Excellent in communication skills and teamwork with colleagues (domestic and international

Good ability to write technical documents and good ability to deliver application/product training presentations to customers and distributor

Frequent international travel is expected: ASEAN countries

Lab study capability: Able to work independently for the lab studies including test design, test performing, result data analysis and test report generation following safe working practices in lab

Skills
Micron
13Mar
APDS Dry Etch Process and Equipment Development Sr Engineer
Micron   via Micron



Req. ID: 131001

Description

Micron’s Advance Process Development S team is looking for high energy, self-motivated, result driven individuals in the role of process and equipment development engineer to support technology development (TD) activities. The individuals will drive early maturity of process and equipment technologies in Micron’s fast paced environment through engagement with Boise TD, equipment suppliers and manufacturing teams in Singapore.

Responsibilities

Quantify benefits of innovative equipment solutions to    Read more

enable early introduction, maturity, and adoption for current and/or next node of 3D NAND technology.

Develop and optimize Dry Etch unit processes to meet the yield and quality requirements of advanced 3D NAND parts (B16R and beyond).

Participate with Boise TD Dry Etch Process development peers on technology choices for the upcoming nodes and able to translate future technology device needs into clear process and equipment requirements.

Identify disruptive equipment and processes early, work with manufacturing and Boise TD to identify viable evaluation path forward in manufacturing.

Initiate and manage experiments on non-unique and unique equipment for process margin and cost of ownership (CoO) improvements. Design and implement advanced process monitoring and control methodologies.

Lead team or sites or suppliers on complex projects in focused meetings with end goal of maturity a technology in record times for technical advantage, cost and productivity.

Serve as a technical expert within Micron, provide advice and recommendations to senior management on improvements from processes, procedures and equipment development. Lead and initiate innovation projects through patents/technical papers.

Communications and collaboration with partners both locally and globally.Strict adherence to Micron Intellectual Property protection policy is a must.

Requirements

BS, MS, of PhD degree in Chemistry, Materials Science, Chemical/Mechanical Engineering, or Physics with minimum of 2 years hands-on experience in leading edge Dry Etch Process area. Fresh PhD candidates in semiconductor relevant area are also welcome to apply.

A fundamental understanding of chemical reactions, kinetics, thermodynamics, physical phenomena and their direct application to Dry Etch Processes.

An in-depth knowledge of plasma physics, and hands on experience with etch processes and plasma processing equipment; understanding of how the hardware and process interact with each other.

An ability to understand and troubleshoot plasm generation, etching effects, chemical reactions, and byproduct within three dimensional (3D) NAND structures and come up with innovative ideas to mitigate undesired effects.

An understanding of the general process steps and process flow for 3D vNAND memory, Dry Etch Process steps in particular.

Excellent skills on design of experiments (DoE), data analysis systems (e.g. JMP) and ability to analyze, conclude and communicate the recommendations in clear and crisp manner.

Self-motivated and adaptable to Micron’s fast paced, demanding and dynamic work environment; flexibility to work for extended hours, as required.

Excellent oral and written communication skills with ability to convey the message clearly and sharply both locally and globally.

Extremely logical approach towards problem solving.

Excellent ability to prioritize and manage multiple projects simultaneously; efficiently utilize available resources or seek peers’ and/or management help to get over the roadblocks to drive to solutions.

Ability to travel for extended periods of time and stay at Boise TD or at vendor site for 4-6 months at a stretch to learn and develop process or equipment technology development.

Suitable candidates may be considered for expat posting to Singapore from overseas Micron locations.

Working Location: 1 North Coast Drive, Singapore 757432

We recruit, hire, train, promote, discipline and provide other conditions of employment without regard to a person's race, color, religion, sex, age, national origin, disability, sexual orientation, gender identity and expression, pregnancy, veteran’s status, or other classifications protected under law.This includes providing reasonable accommodation for team members' disabilities or religious beliefs and practices.

Each manager, supervisor and team member is responsible for carrying out this policy. The EEO Administrator in Human Resources is responsible for administration of this policy. The administrator will monitor compliance and is available to answer any questions on EEO matters.

To request assistance with the application process, please contact Micron’s Human Resources Department at 1-800-336-8918 (or 208-368-4748).

Keywords:Singapore || North West (SG-03) || Singapore (SG) || Technology Development || College || Regular || Engineering || #LI-LY1 ||

Skills
THE SUPREME HR ADVISORY PTE. LTD.
11Mar
Process Engineer // Tuas // Transport Provided // Experience In Etching And Chemical Processing
THE SUPREME HR ADVISORY PTE. LTD.   via JobsCentral



Roles & Responsibilities

1. Duties & Responsibilities:

1.1 Responsible for manufacturing process at Stamping, Wet Cleaning, Lamination, UV Exposure and Etching for lead frame and Waste Chemical treatment at PES.

1.2 Responsible for improvement programs in Yield, Capacity, Cycle Time and Capability to achieve cost reduction.

1.3 Perform 5W1H methodology to determine root cause and implement improvement actions on daily production lot rejects.

1.4 Perform evaluation to optimize and improve the manufacturing process    Read more

capability and yield for new products.

1.5 Qualify new materials; processes, equipment and system for continuous improvement.

1.7 Establish and generate the process control, process FMEA and operation work Instruction documentation.

1.8 Perform SPC review.

1.9 Perform other duties that may be assigned by the superior from time to time

Requirements

Qualification : Bachelor Degree in Engineering (Mechanical, Chemical or Manufacturing)

Job Requirements : Knowledge in copper etching, photosensitive film imaging & chemical processing.

Experience in lead-frame or PCB etching manufacturing processes. Skillful in problem solving techniques using statistical tools and data analysis. Familiar with Microsoft Office software and project management skill.

Skills
THE SUPREME HR ADVISORY PTE. LTD.
11Mar
Process Engineer // Copper Etching // Chemical Processing // Tuas // Transport Provided
THE SUPREME HR ADVISORY PTE. LTD.   via JobsCentral



Roles & Responsibilities

1. Duties & Responsibilities:

1.1 Responsible for manufacturing process at Stamping, Wet Cleaning, Lamination, UV Exposure and Etching for lead frame and Waste Chemical treatment at PES.

1.2 Responsible for improvement programs in Yield, Capacity, Cycle Time and Capability to achieve cost reduction.

1.3 Perform 5W1H methodology to determine root cause and implement improvement actions on daily production lot rejects.

1.4 Perform evaluation to optimize and improve the manufacturing process    Read more

capability and yield for new products.

1.5 Qualify new materials; processes, equipment and system for continuous improvement.

1.7 Establish and generate the process control, process FMEA and operation work Instruction documentation.

1.8 Perform SPC review.

1.9 Perform other duties that may be assigned by the superior from time to time

Requirements

Job Requirements : Knowledge in copper etching, photosensitive film imaging & chemical processing.

Experience in lead-frame or PCB etching manufacturing processes. Skillful in problem solving techniques using statistical tools and data analysis. Familiar with Microsoft Office software and project management skill.

Skills
Nanyang Technological University
11Mar
Senior Research Fellow
Nanyang Technological University   via JobsCentral



Roles & Responsibilities

CNRS International-NTU-Thales Research Alliance

Specialisation : Nanofabrication/ Nanomaterials

We are looking for a senior research staff in nanomaterial and nanodevices fabrication process in cleanroom.

Familiar with micro-fabrication facilities such as mask aligner, e-beam evaporator, reactive-ion etching (RIE), inductively coupled plasma (ICP) and flip-chip bonder.

Skilled in controlled synthesis of nanostructures (silicon, oxide, carbon) especially the fabrication of patterning sub-micro nanostructures.

The successful applicant must demonstrate his/ her diligence and execute the    Read more

work to his/ her best ability.

Requirements

A PhD degree in a relevant area.

Candidate will be required to work in a Cleanroom environment.

Administrative work including documentation and lab equipment maintenance will be required.

Skills
THE SUPREME HR ADVISORY PTE LTD
10Mar
Process Engineer [PCB etching/ 5 days/ Allowance]
THE SUPREME HR ADVISORY PTE LTD   via gumtree

If you are interested to apply, kindly WhatsApp me your updated resume in DOC file and allow our Consultant to match you with our Clients.Whatsapp: +65 93985397 (Jeslyn)(Erantha Lim Jia Ying) Reg No: R1874710 The Supreme HR Advisory Pte Ltd EA No: 14C7279

Skills
Nanyang Technological University
08Mar
Research Associate
Nanyang Technological University   via JobsCentral



Roles & Responsibilities

Lead as a project coordinator to run the photonic integrated chip as well as the quartz pendulum projects. It is also necessary to work with Lab Manager and other process module leaders to move the in-line wafers smoothly without any wafer breakages.

Self-initiator with effective Design of Experiment (DOE) to complete the work on time with conclusive remarks.

Continuous support and immediate feedback to the Principal Investigator/Lab Manager/Process    Read more

Integrator/ by Lithography, Device integration, measuring the fabricated devices, data analysis and drafting reports for the project deliverables.

Requirements

Master Degree (with minimum 6 years of relevant experience) / Bachelor degree (with minimum 8 years of relevant experience) in either Electrical & Electronics Engineering/ Material Science/Physics/Chemistry or Other related field.

Candidate who possesses a PhD degree with minimum 3 years of relevant field of research may also be appointed to this position.

Hands-on experience with strong knowledge and understanding in the area of wafers and its Devices, Material Characterization (Electrical, Structural, Surface, mechanical and etc…), Device Processing (Front-side and Back-side Optical Photolithography, Metallization, Lift-off, Ion Implantation, Dry/Wet Etching, Rapid Thermal Annealing, and etc…), Device Measurements, device reliability studies and Analytical Measurement techniques (SEM, EDX, Ellispometry, Nanocal, FTIR and etc…)

Knowledge/Hands-on experience in Mask-Aligner (Wafer/sample Size: irregular small samples to 6-inch diameter), Electron Beam Evaporator, Handling wafers (e.g; Si, SOI, lithium niobate, Sapphire, SiC, and CVD-Diamond), Wet Benches, Plasma systems (ICP, RIE, PECVD and etc…), Annealing Systems, Wafer Bonding System, Lapping, Polishing and etc…

Proficient enough to analyse the measured data followed by drafting project reports and If required, Research publications (Journal/conference papers).

Strong knowledge/experience/skills in using Semiconductor Parameter Analyser for electrical measurements as well as the optical measurements using optical benches, laser, fibre and etc...

Knowledge/Experience in designing mask layout using CAD software (e.g: Clewin and other equivalent software) will be a big plus.

Appointment grade and starting salary will depend on the candidate's qualification and relevant experience.

Good interpersonal skills and ability to work independently to lead the assigned project.

Application Procedure

Qualified applicants are invited to send in their application on the prescribed form obtainable from: http://www.ntu.edu.sg/ohr/career/submit-an-application/Pages/Research-Positions.aspx

Completed application forms with detailed resume may be submitted via email to Dr Subramaniam Arulkumaran ([Click Here to Email Your Resume]) with the subject "Application for Position of Research Associate (MTDC)".

Electronic submission of application is only encouraged.

Only short-listed candidates will be notified for personnel/phone interview.

Application closes when the position is filled.

Skills
Micron
02Mar
Fab10 PCVD Process and Equipment Senior Engineer
Micron   via Micron



Req. ID: 117683

A Process Owner is responsible to direct the sustaining/improvement efforts for Quality, Yield and Equipment performance for your respective process area.

Responsibilities :

Partner with Technology Development team on technology transfer

Meet and work with Process Integration, Production, and other process areas.

Send out periodic reports on process metrics.Submit SWRs and ECNs to evaluate and implement process changes.Review submitted ECNs.

Review QDR trends and react accordingly.Partner with production and shift    Read more

engineering to determine and implement corrective actions for excursions.

Follow up on all process related SWRs.

Setting up contamination, defect, and performance qualification procedures and frequency

Characterizing the process response to parameters

Defining the process margin with respect to upstream and downstream steps

Qualifying conversions and new processes

Improving the process cost of ownership, throughput, and performance;

Reducing scrap and excursions

Requirements :

Experience with HARC/carbon etch and familiar with 300mm LAM Kiyo and Flex systems, as well as TEL LK/RK platform.

Master / Bachelor’s Degree in Engineering.

Minimum 2 years relevant semiconductor industry experience in high volume 300mm manufacturing.

The ability to work with a wide variety of people in different areas of process integration, process development, and pilot production to effectively accomplish tasks in a timely manner.

The ability to plan and execute effective, well-designed experiments and write clear, concise reports documenting the results.

The ability to suggest process alternatives and evaluate different options that may provide improved etch process improvement.

The ability to suggest equipment design optimization, identify source of hardware variation for chamber matching, and productivity improvement.

An understanding of the interactions between process and hardware and be able to leverage this knowledge.

The ability to evaluate and make insightful inferences from large amounts of various types of data, such as physical & electrical analysis.

The ability to interact and collaborate with integration engineers to develop robust film and related module as well as deploy the process

The ability to be a self-motivated team player

A high degree of motivation, goal orientation and possess the ability to aggressively focus on solving problems both as part of a team and individually.

Excellent verbal and written communication skills are required to be effective

Demonstrated to be dependable and willing to take responsibility for the development of a process and tool.

Working Location : 1, North Coast Drive, Singapore 757432

We recruit, hire, train, promote, discipline and provide other conditions of employment without regard to a person's race, color, religion, sex, age, national origin, disability, sexual orientation, gender identity and expression, pregnancy, veteran’s status, or other classifications protected under law.This includes providing reasonable accommodation for team members' disabilities or religious beliefs and practices.

Each manager, supervisor and team member is responsible for carrying out this policy. The EEO Administrator in Human Resources is responsible for administration of this policy. The administrator will monitor compliance and is available to answer any questions on EEO matters.

To request assistance with the application process, please contact Micron’s Human Resources Department at 1-800-336-8918 (or 208-368-4748).

Keywords:Singapore || North West (SG-03) || Singapore (SG) || Frontend Manufacturing || Experienced || Regular || Engineering || #LI-SING�; #LI-ST1 ||

Skills